TE100
TE200
Software configurable E1/T1/J1 ports
Up to 60 simultaneous VoIP to ISDN calls
Cost-effective call routing
Connect existing ISDN PBX to VoIP
Connect VoIP-only system to ISDN
Connect multiple PABX at different sites
Feature-rich
A robust feature set that fulfills your various needs and cuts communication cost
Easy
Easy-to-navigate GUI and simple installation saves you loads of time
Reliable
Stable with advanced hardware and software architecture
Compatibility
Compatible with various ISDN PBX, IP-PBX, and softswitch. Interoperable with Yeastar, Elastix
and Lync Server
| Models | TE100 | TE200 | ||||
| E1/T1/J1 Ports (Support PRI, E&M) | 1 | 2 | ||||
| Protocol | SIP (RFC3261) | |||||
| Transport Protocol | UDP, TCP, TLS, SRTP | |||||
| Codec | G.711 (alaw/ulaw), G.722, G.726, G.729A, GSM, ADPCM, Speex | |||||
| Echo Cancellation | ITU-T G.168 LEC Echo Cancellation, Dynamic Jitter Buffer | |||||
| DTMF Mode | RFC2833, SIP Info, In-band | |||||
| Network | DDNS, Firewall, PPPoE, Static IP, QoS, Static Route | |||||
| Network Protocol | FTP, TFTP, HTTP, SSH | |||||
| PRI switch types | Euro ISDN, nation, Q.SIG | |||||
| Caller ID | BELL202, ETSI (V23), NTT (V23-Japan), and DTMF-based CID | |||||
| LAN | 1 10/100/1000Mbps | |||||
| WAN | 1 10/100/1000Mbps | |||||
| Power Supply | AC 100-240V (12V 2A) | |||||
| Dimensions (L × W × H) (mm) | 213 x 160 x 44 | |||||
| Operation Range | 0°C to 40°C, 32°F to 104°F; | |||||
| Storage Range | -20°C to 65°C, -4°F to 149°F | |||||
| Humidity | 10-90% non-condensing | |||||
Key Features
- Blocklist
- Call Duration Limitation
- Caller ID Prefix
- Call Routing Rules
- E1/T1/J1 Diagnostics
- Firmware Upgrade by HTTP/TFTP
- NAT Traversal
- T.38 fax
- SIP Trunk Support
- SIP Registrar for IP phones
- Web-based Configuration
- Call Detail Record (CDR)
- Caller ID
- Configure backup/restore
- Custom Prompts
- Firewall
- IP Blocklist
- Packet Capture Tool
- Trunk Group
- SIP Peer Mode
- System Logs
- More Information in Datasheet
USE CASES
E1/T1/PRI Lines for IP-PBX
TE Series PRI VoIP Gateway provides an easy and trustworthy conjunction of IP-based system and E1/T1/PRI line. It is suitable when the local IP telephony network is constructed gradually in an institution that already has a legacy E1/T1/PRI network. Any SIP-based VoIP infrastructure, including IP-PBX, hosted IP-PBX, VoIP call center could benefit from this conjunction.
More
Connect Legacy Equipment to VoIP
Yeastar TE can connect legacy equipment to cost-saving SIP trunkings. You could also connect analog phones and fax machines to SIP trunkings with TE series. Besides preserving investment on legacy equipment, enterprises could also utilize the benefit of VoIP easily and conveniently.
